Flooring is a key component of any residential or commercial building. Maintaining new flooring is not difficult if you avoid common mistakes such as neglecting moisture, overlooking the subfloor, using harsh cleaners, skipping expansion gaps, and failing to care for high-traffic areas.
This blog post will define what it takes to avoid common mistakes and maintain your new flooring effectively.
How to Avoid Common Mistakes to Maintain Your New Flooring?
You can take advantage of the following tactics and smartly maintain your potential flooring:
1. Meager Subfloor Preparation: Overlooking an uneven, dirty, or damp subfloor leads to squeaks, shifting, mold, and quick deterioration of the floor.
2. Dampness Issues: Failing to seal the subfloor or not testing for moisture invites deforming and decay, especially under laminate or wood.
3. Avoiding the Expansion Gaps: Overseeing the space around the perimeter results in warping or buckling from humidity or temperature changes.
4. Consuming Wrong Cleaning Products: A damp mop with an appropriate cleaner is the best—harsh chemicals like ammonia or bleach strip finishes.
5. Excessive Water: Use a moist mop instead of a soaking one. Over-wetting floors, especially wood or laminate, can cause damage.
6. Take notice of Traffic Spots: Allowing grit or dirt to accumulate in entrances causes dullness and scratches; to prevent it, you can use mats or rugs.
7. Moving or Dragging Furniture: Rearrange carefully because dragging furniture without pads causes scratches or dents.
8. Ignoring Humidity: Excessive dampness or dryness causes wood to swell or shrink. Consume humidifiers or dehumidifiers.
How to Maintain Your New SPC Flooring
SPC (Stone Plastic Composite) flooring offers durability, a luxurious appearance, and low maintenance. SPC Flooring Installation has become prevalent worldwide these days due to its numerous advantages for residential and commercial building owners. In addition, SPC flooring offers elegant patterns and designs that inspire interior remodeling.
Despite its numerous benefits, improper installation can cause various problems. This hands-on guide from Ezzy Manufacturing walks you through the mistakes made during the SPC installation process.
Importance of Getting the Subfloor Ready
During SPC flooring installation, preparing the subfloor is the most crucial step. Skipping this step will result in your new flooring being rutted, creaky, or whacked too early. Before laying down the SPC planks, make sure the subfloor is dry, flat, and clean, as this will help your new floors provide a solid base to settle on.
Make the Flooring Adjust
Installation of SPC flooring requires time to adjust to the room where it is supposed to be installed. This needs to let the planks settle in the room for a short time to acclimate to the temperature and moisture there.
This will prevent the flooring from contracting or expanding later on. You will need to follow the manufacturer's instructions within the time required for the flooring to adjust to avoid any further issues.
Leave Space for Expansion
It’s significant to leave gaps around the edges and between the rooms during SPC flooring installation. These gaps allow the floor to contract and expand with the changes in humidity and temperature. Not leaving enough gaps will result in the flooring buckling or warping over time. Follow the manufacturer’s guidelines to determine the size of these gaps, which will keep your SPC floors in good condition.
Inaccurate Installation of Click-Lock Flooring
SPC flooring also uses a click-lock system to fasten planks together securely. Using an accurate technique is essential when locking or tapping the planks during installation. A wrong technique can damage the planks, making the locking system brittle, and cause the flooring to become slack or unbalanced.
Cut and Fit the Planks of SPC Flooring Cautiously
During flooring installation, it’s crucial to cut and fit the planks carefully to achieve an even, uniform look. Not fitting the planks appropriately around the corner doorways or rushing can result in visible gaps and affect the overall look of the floors. Don’t expedite the process; keep your time to ensure precise settings and cuts for a sophisticated appearance.
Importance of Following the Instructions of Manufacturer
SPC flooring products usually come with the manufacturer's manual, a detailed guide on installing them correctly.
Failing to abide by these guidelines can result in cancellation of the warranty and cause further problems during the installation process.
So make sure to follow the manufacturer’s instructions to install the flooring properly, and keep your warranty valid.
Durable SPC Flooring
Ezzy Manufacturing provides premium SPC flooring construction. A high-density, high-grade core with high limestone content is used for high quality, strength, and stability. Our SPC flooring is 100% waterproof, hence it is permanently stable in all climates.
It has a decisive 20 mil wear layer that suits high-traffic residential and commercial use. Ezzy Manufacturing’s SPC flooring has a UV-coated surface for resistance to scratches, stains, and fading. Hence, we offer you a durable, unrivalled, low-maintenance flooring option.
To Wrap It Up
We hope you enjoyed our blog post that outlines common mistakes people make when maintaining new flooring. In addition, proper installation and consistent maintenance are the keys to keeping your new flooring.
To protect the strength of your potential flooring, keep the aforementioned mistakes in mind. This way, you can keep your new flooring clean and durable over time.
FAQs
Q.1 How often do my new floors need to be cleaned?
A: High-traffic areas need to be vacuumed or cleaned every few days or daily. Mopping with an appropriate cleaner is usually suggested once a week or as required.
Q.2 What is the best way to remove tough stains or scuff marks?
A: Check manufacturer’s recommendations for tough stains or scuff marks. For scuff marks on vinyl floors, sprinkle baking soda with a dusting, and rubbing a little alcohol with a soft cloth works, but always test on an ordinary spot first.
3 How should I clean my new SPC flooring to maintain it?
SPC flooring is long-lasting, low-maintenance, and waterproof, making it an exceptional choice for households. To maintain it, it should be swept or vacuumed daily, and a moist mop should be used weekly along with a pH-neutral cleaner.
Instantly clean leaks or spills to avoid stains. Use felt and pads under the furniture. Don’t try to use chemicals and steam mops alongside water. By doing so, you can safeguard its water-proof finish to a great extent.
